lixz@ieecas_cn
Member
Please tell me where I have an error. See follow steps:
1、[pcem@ln3 definemld]$ ./definemldbdy -s 10 -v -i mldfile.nc -o sst_HadOIBl_bc_64x128_1949_2001_c020411.nc
Data will be run through 1-2-1 filter 10 times
bincount:
...............
NOTE: LANDFRAC not found on sst_HadOIBl_bc_64x128_clim_c020411.nc
. Filling MLD over entire globe
NEIGHBORFILL: iter 1 filled 1917 points
NEIGHBORFILL: iter 2 filled 242 points
NEIGHBORFILL: iter 3 filled 128 points
NEIGHBORFILL: iter 4 filled 128 points
NEIGHBORFILL: iter 5 filled 58 points
NEIGHBORFILL: iter 6 filled 0 points
2、[pcem@ln3 defineqflux]$ ./defineqflux -f camrun.cam2.h0.0001-01.nc -l camrun.cam2.h0.0001-12.nc -s sst_HadOIBl_bc_64x128_clim_c020411.nc -v
./defineqflux -f camrun.cam2.h0.0001-01.nc -l camrun.cam2.h0.0001-12.nc -s sst_HadOIBl_bc_64x128_clim_c020411.nc
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.74337 conc=0.980817
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-0.896995 conc=0.985309
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.00395 conc=0.985812
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.78006 conc=0.985012
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.74863 conc=0.983343
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.79953 conc=0.991079
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.77323 conc=0.940438
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.8041 conc=0.946158
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.78579 conc=0.934672
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.77202 conc=0.957135
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.79622 conc=0.974542
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.84015 conc=0.983802
Read fluxes file camrun.cam2.h0.0001-01.nc fsns=104.984 flns=15.1369 lhflx=8.08932 shflx=3.47067
Read fluxes file camrun.cam2.h0.0001-02.nc fsns=109.115 flns=33.1914 lhflx=18.6872 shflx=10.2565
Read fluxes file camrun.cam2.h0.0001-03.nc fsns=61.2756 flns=33.391 lhflx=22.2806 shflx=14.0935
Read fluxes file camrun.cam2.h0.0001-04.nc fsns=23.6344 flns=34.1558 lhflx=19.5407 shflx=11.4106
Read fluxes file camrun.cam2.h0.0001-05.nc fsns=6.80561 flns=43.6595 lhflx=42.5441 shflx=44.1078
Read fluxes file camrun.cam2.h0.0001-06.nc fsns=1.55224 flns=26.4302 lhflx=34.7657 shflx=59.7178
Read fluxes file camrun.cam2.h0.0001-07.nc fsns=1.78883 flns=21.7879 lhflx=6.66443 shflx=1.50529
Read fluxes file camrun.cam2.h0.0001-08.nc fsns=6.92303 flns=20.8793 lhflx=4.50113 shflx=4.00383
Read fluxes file camrun.cam2.h0.0001-09.nc fsns=17.0013 flns=18.9632 lhflx=7.35256 shflx=10.8286
Read fluxes file camrun.cam2.h0.0001-10.nc fsns=29.5106 flns=16.5603 lhflx=10.3396 shflx=6.27197
Read fluxes file camrun.cam2.h0.0001-11.nc fsns=67.9152 flns=23.4208 lhflx=14.2409 shflx=8.05579
Read fluxes file camrun.cam2.h0.0001-12.nc fsns=118.742 flns=19.2201 lhflx=10.3325 shflx=4.59939
Using SST mid-months 11 and 1 to compute QFLUX mid-month 0
dayfact=62
Using SST mid-months 0 and 2 to compute QFLUX mid-month 1
dayfact=56
Using SST mid-months 1 and 3 to compute QFLUX mid-month 2
dayfact=62
Using SST mid-months 2 and 4 to compute QFLUX mid-month 3
dayfact=60
Using SST mid-months 3 and 5 to compute QFLUX mid-month 4
dayfact=62
Using SST mid-months 4 and 6 to compute QFLUX mid-month 5
dayfact=60
Using SST mid-months 5 and 7 to compute QFLUX mid-month 6
dayfact=62
Using SST mid-months 6 and 8 to compute QFLUX mid-month 7
dayfact=62
Using SST mid-months 7 and 9 to compute QFLUX mid-month 8
dayfact=60
Using SST mid-months 8 and 10 to compute QFLUX mid-month 9
dayfact=62
Using SST mid-months 9 and 11 to compute QFLUX mid-month 10
dayfact=60
Using SST mid-months 10 and 0 to compute QFLUX mid-month 11
dayfact=62
nc_put_vara_double -1 failure: Variable not found
Aborted
3、[pcem@ln3 defineqflux]$ ./cam < namelist
........
LAGYIN: Departure pt out of bounds: jcen,icount,nlon*plev= 4
7 3328
ENDRUN: called without a message string
abort:
1、[pcem@ln3 definemld]$ ./definemldbdy -s 10 -v -i mldfile.nc -o sst_HadOIBl_bc_64x128_1949_2001_c020411.nc
Data will be run through 1-2-1 filter 10 times
bincount:
...............
NOTE: LANDFRAC not found on sst_HadOIBl_bc_64x128_clim_c020411.nc
. Filling MLD over entire globe
NEIGHBORFILL: iter 1 filled 1917 points
NEIGHBORFILL: iter 2 filled 242 points
NEIGHBORFILL: iter 3 filled 128 points
NEIGHBORFILL: iter 4 filled 128 points
NEIGHBORFILL: iter 5 filled 58 points
NEIGHBORFILL: iter 6 filled 0 points
2、[pcem@ln3 defineqflux]$ ./defineqflux -f camrun.cam2.h0.0001-01.nc -l camrun.cam2.h0.0001-12.nc -s sst_HadOIBl_bc_64x128_clim_c020411.nc -v
./defineqflux -f camrun.cam2.h0.0001-01.nc -l camrun.cam2.h0.0001-12.nc -s sst_HadOIBl_bc_64x128_clim_c020411.nc
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.74337 conc=0.980817
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-0.896995 conc=0.985309
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.00395 conc=0.985812
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.78006 conc=0.985012
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.74863 conc=0.983343
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.79953 conc=0.991079
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.77323 conc=0.940438
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.8041 conc=0.946158
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.78579 conc=0.934672
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.77202 conc=0.957135
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.79622 conc=0.974542
Read sst and ice conc file sst_HadOIBl_bc_64x128_clim_c020411.nc sst=-1.84015 conc=0.983802
Read fluxes file camrun.cam2.h0.0001-01.nc fsns=104.984 flns=15.1369 lhflx=8.08932 shflx=3.47067
Read fluxes file camrun.cam2.h0.0001-02.nc fsns=109.115 flns=33.1914 lhflx=18.6872 shflx=10.2565
Read fluxes file camrun.cam2.h0.0001-03.nc fsns=61.2756 flns=33.391 lhflx=22.2806 shflx=14.0935
Read fluxes file camrun.cam2.h0.0001-04.nc fsns=23.6344 flns=34.1558 lhflx=19.5407 shflx=11.4106
Read fluxes file camrun.cam2.h0.0001-05.nc fsns=6.80561 flns=43.6595 lhflx=42.5441 shflx=44.1078
Read fluxes file camrun.cam2.h0.0001-06.nc fsns=1.55224 flns=26.4302 lhflx=34.7657 shflx=59.7178
Read fluxes file camrun.cam2.h0.0001-07.nc fsns=1.78883 flns=21.7879 lhflx=6.66443 shflx=1.50529
Read fluxes file camrun.cam2.h0.0001-08.nc fsns=6.92303 flns=20.8793 lhflx=4.50113 shflx=4.00383
Read fluxes file camrun.cam2.h0.0001-09.nc fsns=17.0013 flns=18.9632 lhflx=7.35256 shflx=10.8286
Read fluxes file camrun.cam2.h0.0001-10.nc fsns=29.5106 flns=16.5603 lhflx=10.3396 shflx=6.27197
Read fluxes file camrun.cam2.h0.0001-11.nc fsns=67.9152 flns=23.4208 lhflx=14.2409 shflx=8.05579
Read fluxes file camrun.cam2.h0.0001-12.nc fsns=118.742 flns=19.2201 lhflx=10.3325 shflx=4.59939
Using SST mid-months 11 and 1 to compute QFLUX mid-month 0
dayfact=62
Using SST mid-months 0 and 2 to compute QFLUX mid-month 1
dayfact=56
Using SST mid-months 1 and 3 to compute QFLUX mid-month 2
dayfact=62
Using SST mid-months 2 and 4 to compute QFLUX mid-month 3
dayfact=60
Using SST mid-months 3 and 5 to compute QFLUX mid-month 4
dayfact=62
Using SST mid-months 4 and 6 to compute QFLUX mid-month 5
dayfact=60
Using SST mid-months 5 and 7 to compute QFLUX mid-month 6
dayfact=62
Using SST mid-months 6 and 8 to compute QFLUX mid-month 7
dayfact=62
Using SST mid-months 7 and 9 to compute QFLUX mid-month 8
dayfact=60
Using SST mid-months 8 and 10 to compute QFLUX mid-month 9
dayfact=62
Using SST mid-months 9 and 11 to compute QFLUX mid-month 10
dayfact=60
Using SST mid-months 10 and 0 to compute QFLUX mid-month 11
dayfact=62
nc_put_vara_double -1 failure: Variable not found
Aborted
3、[pcem@ln3 defineqflux]$ ./cam < namelist
........
LAGYIN: Departure pt out of bounds: jcen,icount,nlon*plev= 4
7 3328
ENDRUN: called without a message string
abort: