Scheduled Downtime
On Tuesday 24 October 2023 @ 5pm MT the forums will be in read only mode in preparation for the downtime. On Wednesday 25 October 2023 @ 5am MT, this website will be down for maintenance and expected to return online later in the morning.
Normal Operations
The forums are back online with normal operations. If you notice any issues or errors related to the forums, please reach out to help@ucar.edu

Error in getting regional data set

D

devarajun@gmail_com

Dev
Member
Hi I am trying to run CLM4 for the region (lat 7 to8 and longitude 68 to 99): I have used the command below and got the error: Any help in this regard will be highly appreciated: ./getregional_datasets.pl -sw 7,68 -ne 38,99 -id 66x50pt_f05_t12_india -mycsmdata $MYCSMDATA
CESM inputdata root directory: /home/devaraju/CLM4/india_inputdata/
Execute: env S_LAT=7 W_LON=68 N_LAT=38 E_LON=99 SIM_YR=1850 SIM_YR_RNG=constant MASK=tx0.1v2 ID=66x50pt_f05_t12_india RCP=-999.9 RES=0.47x0.63 MYCSMDATA=/home/devaraju/CLM4/india_inputdata/    ncl /home/devaraju/cesm1_0_4/models/lnd/clm/tools/ncl_scripts/getregional_datasets.ncl
 Copyright (C) 1995-2011 - All Rights Reserved
 University Corporation for Atmospheric Research
 NCAR Command Language Version 6.0.0
 The use of this software is governed by a License Agreement.
 See http://www.ncl.ucar.edu/ for more details.
(0)    Extract out regional datasets from global datasets
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/CLM4/india_inputdata//lnd/clm2/griddata/griddata_0.47x0.63_c070918.nc /home/devaraju/CLM4/india_inputdata//lnd/clm2/griddata/griddata_66x50pt_f05_t12_india.nc
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/CLM4/india_inputdata//lnd/clm2/griddata/fracdata_0.47x0.63_tx0.1v2_c070928.nc /home/devaraju/CLM4/india_inputdata//lnd/clm2/griddata/fracdata_66x50pt_f05_t12_india_tx0.1v2.nc
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/CLM4/india_inputdata//lnd/clm2/surfdata/surfdata_0.47x0.63_simyr1850_c100826.nc /home/devaraju/CLM4/india_inputdata//lnd/clm2/surfdata/surfdata_66x50pt_f05_t12_india_simyr1850.nc
(0)    Input global fpftdyn file does not exist or not found: -2147483647
(0)    Input global flndtopo file does not exist or not found: /home/devaraju/CLM4/india_inputdata//lnd/clm2/griddata/topodata_0.47x0.63_USGS_c070918.nc
(0)    Input global faerdep file does not exist or not found: -2147483647
(0)    Input global stream_fldfilename_ndep file does not exist or not found: -2147483647
(0)    Execute:ncks -O -d nj,207,272 -d ni,109,158 /home/devaraju/CLM4/india_inputdata//atm/datm7/domain.lnd.fv0.47x0.63_tx0.1v2_070929.nc /home/devaraju/CLM4/india_inputdata//atm/datm7/domain.clm/domain.lnd.66x50pt_f05_t12_india_tx0.1v2.nc
nco_err_exit(): ERROR Short NCO-generated message (usually name of function that triggered error): nco_create()
nco_err_exit(): ERROR Error code is 2. Translation into English with nc_strerror(2) is "No such file or directory"
fatal:Conditional statements (if and do while) require SCALAR logical values, see all and any functions
fatal:Execute: Error occurred at or near line 229 in file /home/devaraju/cesm1_0_4/models/lnd/clm/tools/ncl_scripts/getregional_datasets.ncl

 
slevis

slevis

Moderator
Staff member
The error explicitly states "No such file or directory" about /home/devaraju/CLM4/india_inputdata//atm/datm7/domain.clm/domain.lnd.66x50pt_f05_t12_india_tx0.1v2.ncCheck the path, file name, and file permissions, try again, and I hope this solves the problem.Sam
 
D

devarajun@gmail_com

Dev
Member
Dear Sam,Thanks  a lot for the reply. I make sure that the file exists now (domain.lnd.66x50pt_f05_t12_india_tx0.1v2.nc). I am now geeting the new error below: ./getregional_datasets.pl -sw 7,68 -ne 38,99 -id 66x50pt_f19_india -mycsmdata $MYCSMDATA
test111CESM inputdata root directory: /home/devaraju/Alaska/input_alaska/inputdata_alaska/
Execute: env S_LAT=7 W_LON=68 N_LAT=38 E_LON=99 SIM_YR=1850 SIM_YR_RNG=constant MASK=tx0.1v2 ID=66x50pt_f19_india RCP=-999.9 RES=0.47x0.63 MYCSMDATA=/home/devaraju/Alaska/input_alaska/inputdata_alaska/    ncl /home/devaraju/Alaska/cesm1_0_4/models/lnd/clm/tools/ncl_scripts/getregional_datasets.ncl
 Copyright (C) 1995-2011 - All Rights Reserved
 University Corporation for Atmospheric Research
 NCAR Command Language Version 6.0.0
 The use of this software is governed by a License Agreement.
 See http://www.ncl.ucar.edu/ for more details.
(0)    Extract out regional datasets from global datasets
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/griddata_0.47x0.63_c070918.nc /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/griddata_66x50pt_f19_india.nc
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/fracdata_0.47x0.63_tx0.1v2_c070928.nc /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/fracdata_66x50pt_f19_india_tx0.1v2.nc
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/surfdata/surfdata_0.47x0.63_simyr1850_c100826.nc /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/surfdata/surfdata_66x50pt_f19_india_simyr1850.nc
(0)    Input global fpftdyn file does not exist or not found: -2147483647
(0)    Execute:ncks -O -d lsmlat,207,272 -d lsmlon,109,158 /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/topodata_0.47x0.63_USGS_c070918.nc /home/devaraju/Alaska/input_alaska/inputdata_alaska//lnd/clm2/griddata/topodata_66x50pt_f19_india.nc
(0)    Input global faerdep file does not exist or not found: -2147483647
(0)    Input global stream_fldfilename_ndep file does not exist or not found: -2147483647
(0)    Execute:ncks -O -d nj,207,272 -d ni,109,158 /home/devaraju/Alaska/input_alaska/inputdata_alaska//atm/datm7/domain.lnd.fv0.47x0.63_tx0.1v2_070929.nc /home/devaraju/Alaska/input_alaska/inputdata_alaska//atm/datm7/domain.clm/domain.lnd.66x50pt_f19_india_tx0.1v2.nc
nco_err_exit(): ERROR Short NCO-generated message (usually name of function that triggered error): nco_create()
nco_err_exit(): ERROR Error code is 2. Translation into English with nc_strerror(2) is "No such file or directory"
fatal:Conditional statements (if and do while) require SCALAR logical values, see all and any functions
fatal:Execute: Error occurred at or near line 229 in file /home/devaraju/Alaska/cesm1_0_4/models/lnd/clm/tools/ncl_scripts/getregional_datasets.ncl

I am sure there is no problem with path, file name, and file permissionsI have the fpftdyn file placed here '/home/devaraju/Alaska/input_alaska/inputdata_alaska/lnd/clm2/surfdata/surfdata.pftdyn_66x50pt_f05_t12_india_simyr1850.nc'and faerdep file placed '/home/devaraju/Alaska/input_alaska/inputdata_alaska/atm/cam/chem/trop_mozart_aero/aero/aerosoldep_monthly_1850_mean_1.9x2.5_c090421.nc'I dont understand it just says file does not exist. Can you please tell me  how to resolve this. Any help will be appreciated. Thanks a lot for your help.   
 
slevis

slevis

Moderator
Staff member
The ncks command that gives the error appears to be looking for two files:/home/devaraju/Alaska/input_alaska/inputdata_alaska//atm/datm7/domain.lnd.fv0.47x0.63_tx0.1v2_070929.nc/home/devaraju/Alaska/input_alaska/inputdata_alaska//atm/datm7/domain.clmIf both are located in the right place and with correct permissions, then I'm not sure what to suggest...Sam
 
D

devarajun@gmail_com

Dev
Member
Dear Sam,Thanks for the reply. I have done it all freshly and it showed me somewhere in the middle(0)    Input global fpftdyn file does not exist or not found: -2147483647
(0)    Input global faerdep file does not exist or not found: -2147483647
(0)    Input global stream_fldfilename_ndep file does not exist or not found: -2147483647 But it says at the end succesfully created regional data sets.Then I moved on to run the model, and I got the error message in the Dear Sam,Thanks for the reply. I have done it all freshly and it showed me somewhere in the middle(0)    Input global fpftdyn file does not exist or not found: -2147483647
(0)    Input global faerdep file does not exist or not found: -2147483647
(0)    Input global stream_fldfilename_ndep file does not exist or not found: -2147483647 But it says at the end succesfully created regional data sets.Then I moved on to run the model, and I got the error message in the cpl.log.130605-182840 file as below:(seq_rearr_gsmapCreate) created new gsmap decomp_type =       2
(seq_rearr_gsmapCreate)   ngseg/gsize        =      256  221184
(seq_rearr_gsmapCreate)   mpisize/active_pes =      256     256
(seq_rearr_gsmapCreate)   avg seg per pe/ape =        1       1
(seq_rearr_gsmapCreate)   nlseg/maxnlsegs    =        1       1
(map_atm2atm_init_mct)  gsmaps ARE IDENTICAL, copyoption =  T
(seq_rearr_gsmapCreate) created new gsmap decomp_type =       2
(seq_rearr_gsmapCreate)   ngseg/gsize        =     2324    3300
(seq_rearr_gsmapCreate)   mpisize/active_pes =      256     256
(seq_rearr_gsmapCreate)   avg seg per pe/ape =        9       9
(seq_rearr_gsmapCreate)   nlseg/maxnlsegs    =       10      10
(map_lnd2lnd_init_mct)  gsmaps are not identical
(seq_rearr_gsmapCreate) created new gsmap decomp_type =       2
(seq_rearr_gsmapCreate)   ngseg/gsize        =     2382  259200
(seq_rearr_gsmapCreate)   mpisize/active_pes =      256     256
(seq_rearr_gsmapCreate)   avg seg per pe/ape =        9       9
(seq_rearr_gsmapCreate)   nlseg/maxnlsegs    =       10      10
(map_rof2rof_init_mct)  gsmaps are not identical
(seq_mct_drv) : Initializing merge components
(seq_mct_drv) : Initializing atm/lnd mapping
(seq_mct_drv) : Performing domain checking
 (domain_check_mct)  error: global atmsize =       221184  global lndsize=
        3300
***********ccsm log is attached and it says "(domain_check_mct) :  atm and lnd grid must have the same global size
000.MCT(MPEU)::die.: from (domain_check_mct)()
 (domain_check_mct)  error: global atmsize =       221184  global lndsize=
        3300 "
Any Idea where  I went wrong? Thanks a lot for your time.
 
slevis

slevis

Moderator
Staff member
This error suggests an inconsisitency in the domain files that you use for the atmosphere vs. the land model. In env_conf set these four variables to be the same for ATM and LND, similar to my example below:










Sam
 
D

devarajun@gmail_com

Dev
Member
Dear Sam, Thanks a lot. I am able tu run now.  I have one more error agian while building I_1850_CN with cndv option. Below is the error:ifort -c -I.  -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/mpich2-install/include -I. -I/home/devaraju/CLM4/india/cases/cndv_ctl/SourceMods/src.clm -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_share -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/main -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeophys -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_mct -I/home/devaraju/CLM4/india/scratch//cndv_ctl/lib/include  -DMAXPATCH_PFT=17 -DCNDV -DCN -D_USEBOX -D_NETCDF -DMCT_INTERFACE -DHAVE_MPI -DLINUX -DSEQ_ -DFORTRANUNDERSCORE -DNO_R16 -DNO_SHR_VMATH  -g -fp-model precise -convert big_endian -assume byterecl -ftz -traceback -O2 -FR  /home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVEstablishmentMod.F90
ifort -c -I.  -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/mpich2-install/include -I. -I/home/devaraju/CLM4/india/cases/cndv_ctl/SourceMods/src.clm -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_share -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/main -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeophys -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_mct -I/home/devaraju/CLM4/india/scratch//cndv_ctl/lib/include  -DMAXPATCH_PFT=17 -DCNDV -DCN -D_USEBOX -D_NETCDF -DMCT_INTERFACE -DHAVE_MPI -DLINUX -DSEQ_ -DFORTRANUNDERSCORE -DNO_R16 -DNO_SHR_VMATH  -g -fp-model precise -convert big_endian -assume byterecl -ftz -traceback -O2 -FR  /home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVLightMod.F90
ifort -c -I.  -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/netcdf-4.1.1/include -I/home/devaraju/mpich2-install/include -I. -I/home/devaraju/CLM4/india/cases/cndv_ctl/SourceMods/src.clm -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_share -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/main -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeophys -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem -I/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/cpl_mct -I/home/devaraju/CLM4/india/scratch//cndv_ctl/lib/include  -DMAXPATCH_PFT=17 -DCNDV -DCN -D_USEBOX -D_NETCDF -DMCT_INTERFACE -DHAVE_MPI -DLINUX -DSEQ_ -DFORTRANUNDERSCORE -DNO_R16 -DNO_SHR_VMATH  -g -fp-model precise -convert big_endian -assume byterecl -ftz -traceback -O2 -FR  /home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVMod.F90
/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVMod.F90(160): error #6580: Name in only-list does not exist.   [FRIVINP_RTM]
                                 frivinp_rtm, iulog
---------------------------------^
/home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVMod.F90(295): error #6404: This name does not have a type, and must have an explicit type.   [FRIVINP_RTM]
    if (frivinp_rtm /= ' ') then
--------^
compilation aborted for /home/devaraju/CLM4/india/cesm1_0_4/models/lnd/clm/src/biogeochem/CNDVMod.F90 (code 1)
gmake: *** [CNDVMod.o] Error 1

Please suggest whats going on here? Thanks again for your time.
 
slevis

slevis

Moderator
Staff member
Looks to me like a bug. Add the following two lines around all instances of the variable frivinp_rtm, as done in clm_varctl.F90.#ifdef RTM
#endifSam
 
D

devarajun@gmail_com

Dev
Member
Dear Dr Sam,Yes thats a bug. It worked for me. As you suggested, Added the two lines around all instances of the variable frivinp_rtm in CNDVMod.F90.Thanks a lot for your quick respone. I am able to run now.
 
You must log in or register to reply here.
Top