Scheduled Downtime
On Tuesday 24 October 2023 @ 5pm MT the forums will be in read only mode in preparation for the downtime. On Wednesday 25 October 2023 @ 5am MT, this website will be down for maintenance and expected to return online later in the morning.
Normal Operations
The forums are back online with normal operations. If you notice any issues or errors related to the forums, please reach out to help@ucar.edu

Issue about using AMWG Diagnostics Package

S

sjsprecious@gmail_com

Member
Dear hannay,Thanks for your detailed reply.(1) I follow the instruction in the C-shell script and "/" is added at the end of test_path and cntl_path. But the same errors show up.(2) For the years, I run my simulation from 2001, so should I set "test_first_yr" and "cntl_first_yr" as 2001? Also, there is no output files from CAM-CHEM named "xxxx_climo.nc". Is it generated by the AMWG package or should I turn on something during the CAM-CHEM running?(3) I have renamed the CAM-CHEM output files like "0001-01.nc", "0001-02.nc", etc, and I specify the "test_casename" and "cntl_casename" as "0001". Should that be correct? Thank you very much for your help.Jian
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
 If you run your simulation from 2001, you should set "test_first_yr" and "cntl_first_yr" to 2001.The xxxx_climo.nc are created when running teh AMWG when you set the variable cntl_compute_climo=0  and  test_compute_climo=0 You should NOT rename your files. The filenames should be what is coming from CESM. I am sorry if the documentation is confusing.If you casename is:  f2000c5.001 and you should in 2001, your files should be: f2000c5.001.cam.h0.2001-01.nc f2000c5.001.cam.h0.2001-02.nc... 

 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
 If you run your simulation from 2001, you should set "test_first_yr" and "cntl_first_yr" to 2001.The xxxx_climo.nc are created when running teh AMWG when you set the variable cntl_compute_climo=0  and  test_compute_climo=0 You should NOT rename your files. The filenames should be what is coming from CESM. I am sorry if the documentation is confusing.If you casename is:  f2000c5.001 and you should in 2001, your files should be: f2000c5.001.cam.h0.2001-01.nc f2000c5.001.cam.h0.2001-02.nc... 

 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
 If you run your simulation from 2001, you should set "test_first_yr" and "cntl_first_yr" to 2001.The xxxx_climo.nc are created when running teh AMWG when you set the variable cntl_compute_climo=0  and  test_compute_climo=0 You should NOT rename your files. The filenames should be what is coming from CESM. I am sorry if the documentation is confusing.If you casename is:  f2000c5.001 and you should in 2001, your files should be: f2000c5.001.cam.h0.2001-01.nc f2000c5.001.cam.h0.2001-02.nc... 

 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
 If you run your simulation from 2001, you should set "test_first_yr" and "cntl_first_yr" to 2001.The xxxx_climo.nc are created when running teh AMWG when you set the variable cntl_compute_climo=0  and  test_compute_climo=0 You should NOT rename your files. The filenames should be what is coming from CESM. I am sorry if the documentation is confusing.If you casename is:  f2000c5.001 and you should in 2001, your files should be: f2000c5.001.cam.h0.2001-01.nc f2000c5.001.cam.h0.2001-02.nc... 

 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
 If you run your simulation from 2001, you should set "test_first_yr" and "cntl_first_yr" to 2001.The xxxx_climo.nc are created when running teh AMWG when you set the variable cntl_compute_climo=0  and  test_compute_climo=0 You should NOT rename your files. The filenames should be what is coming from CESM. I am sorry if the documentation is confusing.If you casename is:  f2000c5.001 and you should in 2001, your files should be: f2000c5.001.cam.h0.2001-01.nc f2000c5.001.cam.h0.2001-02.nc... 

 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks a lot for your help. My output name is like "BMOZ.cam.0001-01.nc". I put all the files under the test_path and cntl_path, with "/" added at the end of those paths. I also set "test_first_yr" and "cntl_first_yr" to 2001 as you suggested. However, I still get the same errors as above.Another weird thing is that even after I turn off the cntl_compute_climo and test_compute_climo, the package is still trying to calculate the climos data. Is there any other variables that should be turned off?In addition, is there any user guide I can follow instead of the short description in the script?Thank you very much and look forwards to your reply. Jian
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks a lot for your help. My output name is like "BMOZ.cam.0001-01.nc". I put all the files under the test_path and cntl_path, with "/" added at the end of those paths. I also set "test_first_yr" and "cntl_first_yr" to 2001 as you suggested. However, I still get the same errors as above.Another weird thing is that even after I turn off the cntl_compute_climo and test_compute_climo, the package is still trying to calculate the climos data. Is there any other variables that should be turned off?In addition, is there any user guide I can follow instead of the short description in the script?Thank you very much and look forwards to your reply. Jian
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks a lot for your help. My output name is like "BMOZ.cam.0001-01.nc". I put all the files under the test_path and cntl_path, with "/" added at the end of those paths. I also set "test_first_yr" and "cntl_first_yr" to 2001 as you suggested. However, I still get the same errors as above.Another weird thing is that even after I turn off the cntl_compute_climo and test_compute_climo, the package is still trying to calculate the climos data. Is there any other variables that should be turned off?In addition, is there any user guide I can follow instead of the short description in the script?Thank you very much and look forwards to your reply. Jian
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks a lot for your help. My output name is like "BMOZ.cam.0001-01.nc". I put all the files under the test_path and cntl_path, with "/" added at the end of those paths. I also set "test_first_yr" and "cntl_first_yr" to 2001 as you suggested. However, I still get the same errors as above.Another weird thing is that even after I turn off the cntl_compute_climo and test_compute_climo, the package is still trying to calculate the climos data. Is there any other variables that should be turned off?In addition, is there any user guide I can follow instead of the short description in the script?Thank you very much and look forwards to your reply. Jian
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks a lot for your help. My output name is like "BMOZ.cam.0001-01.nc". I put all the files under the test_path and cntl_path, with "/" added at the end of those paths. I also set "test_first_yr" and "cntl_first_yr" to 2001 as you suggested. However, I still get the same errors as above.Another weird thing is that even after I turn off the cntl_compute_climo and test_compute_climo, the package is still trying to calculate the climos data. Is there any other variables that should be turned off?In addition, is there any user guide I can follow instead of the short description in the script?Thank you very much and look forwards to your reply. Jian
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
How did you set the casename ? If you output file is BMOZ.cam.0001-01.ncthe casename should be: BMOZIs it it what you used ?
At this time, the only documentation for the AMWG diag script is what is included in the script. 
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
How did you set the casename ? If you output file is BMOZ.cam.0001-01.ncthe casename should be: BMOZIs it it what you used ?
At this time, the only documentation for the AMWG diag script is what is included in the script. 
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
How did you set the casename ? If you output file is BMOZ.cam.0001-01.ncthe casename should be: BMOZIs it it what you used ?
At this time, the only documentation for the AMWG diag script is what is included in the script. 
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
How did you set the casename ? If you output file is BMOZ.cam.0001-01.ncthe casename should be: BMOZIs it it what you used ?
At this time, the only documentation for the AMWG diag script is what is included in the script. 
 
hannay

hannay

Cecile Hannay
AMWG Liaison
Staff member
How did you set the casename ? If you output file is BMOZ.cam.0001-01.ncthe casename should be: BMOZIs it it what you used ?
At this time, the only documentation for the AMWG diag script is what is included in the script. 
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks for your reply. Yes, I set casename as "BMOZ". For the test_first_yr, I try either "2001" and "0001", but both return the same errors.I just feel confused why the package is still trying to calculate the climos data even if I turn it off (test_first_yr = 1).My CAM version is CAM4. Do you have any suggestion about which version from the repository I should use? Thank you for your help. Jian 
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks for your reply. Yes, I set casename as "BMOZ". For the test_first_yr, I try either "2001" and "0001", but both return the same errors.I just feel confused why the package is still trying to calculate the climos data even if I turn it off (test_first_yr = 1).My CAM version is CAM4. Do you have any suggestion about which version from the repository I should use? Thank you for your help. Jian 
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks for your reply. Yes, I set casename as "BMOZ". For the test_first_yr, I try either "2001" and "0001", but both return the same errors.I just feel confused why the package is still trying to calculate the climos data even if I turn it off (test_first_yr = 1).My CAM version is CAM4. Do you have any suggestion about which version from the repository I should use? Thank you for your help. Jian 
 
S

sjsprecious@gmail_com

Member
Dear hannay,Thanks for your reply. Yes, I set casename as "BMOZ". For the test_first_yr, I try either "2001" and "0001", but both return the same errors.I just feel confused why the package is still trying to calculate the climos data even if I turn it off (test_first_yr = 1).My CAM version is CAM4. Do you have any suggestion about which version from the repository I should use? Thank you for your help. Jian 
 
You must log in or register to reply here.
Top