Scheduled Downtime
On Tuesday 24 October 2023 @ 5pm MT the forums will be in read only mode in preparation for the downtime. On Wednesday 25 October 2023 @ 5am MT, this website will be down for maintenance and expected to return online later in the morning.
Normal Operations
The forums are back online with normal operations. If you notice any issues or errors related to the forums, please reach out to help@ucar.edu

Porting cesm1.2.0, 'underscore' problems

A

advita6@gmail_com

New Member
Hi Santo,./check_case
check_case OK
[asampath@npp port1]$ csh port1.run
-------------------------------------------------------------------------
 CESM BUILDNML SCRIPT STARTING
 - To prestage restarts, untar a restart.tar file into /home/asampath/CESM/cesm1_2_2/scripts/port1/run
 infile is /home/asampath/CESM/cesm1_2_2/scripts/port1/Buildconf/cplconf/cesm_namelist
CAM writing dry deposition namelist to drv_flds_in
CAM writing namelist to atm_in
CLM configure done.
CLM adding use_case 2000_control defaults for var sim_year with val 2000
CLM adding use_case 2000_control defaults for var sim_year_range with val constant
CLM adding use_case 2000_control defaults for var use_case_desc with val Conditions to simulate 2000 land-use
CICE configure done.
POP2 build-namelist: ocn_grid is gx1v6
POP2 build-namelist: ocn_tracer_modules are  iage
 CESM BUILDNML SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
-------------------------------------------------------------------------
 CESM PRESTAGE SCRIPT STARTING
 - Case input data directory, DIN_LOC_ROOT, is /home/asampath/CESM/inputdata
 - Checking the existence of input datasets in DIN_LOC_ROOT
 CESM PRESTAGE SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION BEGINS HERE
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150812-223329: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150812-223329


What might be causing this?Thank youThank you. It works. now issues in run.   
 
A

advita6@gmail_com

New Member
Hi Santo,./check_case
check_case OK
[asampath@npp port1]$ csh port1.run
-------------------------------------------------------------------------
 CESM BUILDNML SCRIPT STARTING
 - To prestage restarts, untar a restart.tar file into /home/asampath/CESM/cesm1_2_2/scripts/port1/run
 infile is /home/asampath/CESM/cesm1_2_2/scripts/port1/Buildconf/cplconf/cesm_namelist
CAM writing dry deposition namelist to drv_flds_in
CAM writing namelist to atm_in
CLM configure done.
CLM adding use_case 2000_control defaults for var sim_year with val 2000
CLM adding use_case 2000_control defaults for var sim_year_range with val constant
CLM adding use_case 2000_control defaults for var use_case_desc with val Conditions to simulate 2000 land-use
CICE configure done.
POP2 build-namelist: ocn_grid is gx1v6
POP2 build-namelist: ocn_tracer_modules are  iage
 CESM BUILDNML SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
-------------------------------------------------------------------------
 CESM PRESTAGE SCRIPT STARTING
 - Case input data directory, DIN_LOC_ROOT, is /home/asampath/CESM/inputdata
 - Checking the existence of input datasets in DIN_LOC_ROOT
 CESM PRESTAGE SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION BEGINS HERE
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150812-223329: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150812-223329


What might be causing this?Thank youThank you. It works. now issues in run.   
 
A

advita6@gmail_com

New Member
Hi Santo,./check_case
check_case OK
[asampath@npp port1]$ csh port1.run
-------------------------------------------------------------------------
 CESM BUILDNML SCRIPT STARTING
 - To prestage restarts, untar a restart.tar file into /home/asampath/CESM/cesm1_2_2/scripts/port1/run
 infile is /home/asampath/CESM/cesm1_2_2/scripts/port1/Buildconf/cplconf/cesm_namelist
CAM writing dry deposition namelist to drv_flds_in
CAM writing namelist to atm_in
CLM configure done.
CLM adding use_case 2000_control defaults for var sim_year with val 2000
CLM adding use_case 2000_control defaults for var sim_year_range with val constant
CLM adding use_case 2000_control defaults for var use_case_desc with val Conditions to simulate 2000 land-use
CICE configure done.
POP2 build-namelist: ocn_grid is gx1v6
POP2 build-namelist: ocn_tracer_modules are  iage
 CESM BUILDNML SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
-------------------------------------------------------------------------
 CESM PRESTAGE SCRIPT STARTING
 - Case input data directory, DIN_LOC_ROOT, is /home/asampath/CESM/inputdata
 - Checking the existence of input datasets in DIN_LOC_ROOT
 CESM PRESTAGE SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION BEGINS HERE
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150812-223329: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150812-223329


What might be causing this?Thank youThank you. It works. now issues in run.   
 
A

advita6@gmail_com

New Member
Hi Santo,./check_case
check_case OK
[asampath@npp port1]$ csh port1.run
-------------------------------------------------------------------------
 CESM BUILDNML SCRIPT STARTING
 - To prestage restarts, untar a restart.tar file into /home/asampath/CESM/cesm1_2_2/scripts/port1/run
 infile is /home/asampath/CESM/cesm1_2_2/scripts/port1/Buildconf/cplconf/cesm_namelist
CAM writing dry deposition namelist to drv_flds_in
CAM writing namelist to atm_in
CLM configure done.
CLM adding use_case 2000_control defaults for var sim_year with val 2000
CLM adding use_case 2000_control defaults for var sim_year_range with val constant
CLM adding use_case 2000_control defaults for var use_case_desc with val Conditions to simulate 2000 land-use
CICE configure done.
POP2 build-namelist: ocn_grid is gx1v6
POP2 build-namelist: ocn_tracer_modules are  iage
 CESM BUILDNML SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
-------------------------------------------------------------------------
 CESM PRESTAGE SCRIPT STARTING
 - Case input data directory, DIN_LOC_ROOT, is /home/asampath/CESM/inputdata
 - Checking the existence of input datasets in DIN_LOC_ROOT
 CESM PRESTAGE SCRIPT HAS FINISHED SUCCESSFULLY
-------------------------------------------------------------------------
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION BEGINS HERE
Wed Aug 12 22:34:01 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150812-223329: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150812-223329


What might be causing this?Thank youThank you. It works. now issues in run.   
 
S

santos

Member
The "runjob" command is specific to systems with Cobalt. I don't know what system you are running with, but if you are getting this error with a non-cobalt system, you are using the wrong mkbatch script, and you should start with a different one.
 
S

santos

Member
The "runjob" command is specific to systems with Cobalt. I don't know what system you are running with, but if you are getting this error with a non-cobalt system, you are using the wrong mkbatch script, and you should start with a different one.
 
S

santos

Member
The "runjob" command is specific to systems with Cobalt. I don't know what system you are running with, but if you are getting this error with a non-cobalt system, you are using the wrong mkbatch script, and you should start with a different one.
 
S

santos

Member
The "runjob" command is specific to systems with Cobalt. I don't know what system you are running with, but if you are getting this error with a non-cobalt system, you are using the wrong mkbatch script, and you should start with a different one.
 
A

advita6@gmail_com

New Member
Hi,This the error i get. I have attached here the log file.Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150813-144742Could you please help me to fix this bug?Thank you
 
A

advita6@gmail_com

New Member
Hi,This the error i get. I have attached here the log file.Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150813-144742Could you please help me to fix this bug?Thank you
 
A

advita6@gmail_com

New Member
Hi,This the error i get. I have attached here the log file.Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150813-144742Could you please help me to fix this bug?Thank you
 
A

advita6@gmail_com

New Member
Hi,This the error i get. I have attached here the log file.Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150813-144742Could you please help me to fix this bug?Thank you
 
A

advita6@gmail_com

New Member
Hi,I created the case with new resolution. Now  i get the different error. Could you please help me to fix that. I don't have to use batch submission. I use direct execution of xx.run.Here attached the copy of xxxx.run. I am not what to use mpiexec or mpirun. Both are there. And then How many processors per node i should set. ? Sun Aug 16 19:37:24 CDT 2015 -- CSM EXECUTION BEGINS HERE
Sun Aug 16 19:37:27 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150816-193653: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653
[asampath@npp port1]$ vi /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653

I also posted in pop2 forum. I didn't receive reply. Could you please help me to fix this bug? I'm stuck . Thank you.
 
A

advita6@gmail_com

New Member
Hi,I created the case with new resolution. Now  i get the different error. Could you please help me to fix that. I don't have to use batch submission. I use direct execution of xx.run.Here attached the copy of xxxx.run. I am not what to use mpiexec or mpirun. Both are there. And then How many processors per node i should set. ? Sun Aug 16 19:37:24 CDT 2015 -- CSM EXECUTION BEGINS HERE
Sun Aug 16 19:37:27 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150816-193653: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653
[asampath@npp port1]$ vi /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653

I also posted in pop2 forum. I didn't receive reply. Could you please help me to fix this bug? I'm stuck . Thank you.
 
A

advita6@gmail_com

New Member
Hi,I created the case with new resolution. Now  i get the different error. Could you please help me to fix that. I don't have to use batch submission. I use direct execution of xx.run.Here attached the copy of xxxx.run. I am not what to use mpiexec or mpirun. Both are there. And then How many processors per node i should set. ? Sun Aug 16 19:37:24 CDT 2015 -- CSM EXECUTION BEGINS HERE
Sun Aug 16 19:37:27 CDT 2015 -- CSM EXECUTION HAS FINISHED
grep: cpl.log.150816-193653: No such file or directory
Model did not complete - see /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653
[asampath@npp port1]$ vi /home/asampath/CESM/cesm1_2_2/scripts/port1/run/cesm.log.150816-193653

I also posted in pop2 forum. I didn't receive reply. Could you please help me to fix this bug? I'm stuck . Thank you.
 
You must log in or register to reply here.
Top